Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Bulb on a Renault Trafic - Opel Vivaro

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Headlight bulb

In this video tutorial, you will learn how to disassemble and replace the dipped beam bulb on the front headlight of a Renault Trafic, but also on an Opel Vivaro. First, open and lift the bonnet of the vehicle; then remove the rubber protective cap for the bulbs found at the back of the headlight and disconnect its electrical connector. At this point, unclip the metal spring to remove the bulb; then simply replace it with a new one of the correct type (with an H4 fitting), and reassemble it correctly by applying the reverse procedure!

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Clutch Pump on a Renault Trafic - Opel Vivaro
Replacing the Clutch Pump on a Renault Trafic - Opel Vivaro
Renault Trafic (2001-2014 / MK 2) .. clutch pump on a Renault Trafic, as well as on an Opel Vivaro. First, get inside the vehicle and locate the clutch pump, which is found behind the clutch.. …
Removing the Front Headlight of the Renault Trafic - Opel Vivaro
Removing the Front Headlight of the Renault Trafic - Opel Vivaro
Renault Trafic (2001-2014 / MK 2) .. along with the bulbs, of the Renault Trafic and Opel Vivaro. First, open the bonnet and start by removing the front grille by unscrewing the screws.. …
Battery Replacement for Renault Trafic, Opel Vivaro
Battery Replacement for Renault Trafic, Opel Vivaro
Renault Trafic (2001-2014 / MK 2) .. the battery of a Renault Trafic and also an Opel Vivaro. First, access the battery compartment and use a spanner to disconnect the battery terminals.. …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos