Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb on Renault Trafic

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

This brief guide shows how to remove and replace the dipped beam bulb of the front headlight on the Renault Trafic. First, open the bonnet and remove the plastic protective cap from the bulb; then disconnect the electrical connector and unclip the metal spring to extract and replace the bulb with a new one of the correct type (in this case, H4). Insert it correctly into the headlight and secure the bulb with the spring; then reconnect the electrical cable!


Updated on 21 June 2026 by ScegliAuto


Related tutorials

Replacing the Dipped Beam Bulb on a Renault Trafic - Opel Vivaro
Replacing the Dipped Beam Bulb on a Renault Trafic - Opel Vivaro
Renault Trafic (2001-2014 / MK 2) In this video tutorial, you will learn how to disassemble and replace the dipped beam bulb on the front headlight of a Renault Trafic, but also on an…
How to Remove the Rear Seats of a Renault Trafic
How to Remove the Rear Seats of a Renault Trafic
Renault Trafic (2001-2014 / MK 2) Before you begin, open the side door of your Renault Trafic. Start by unfastening the lower side hooks that secure the rear seats to the floor. Then,…
How to Change the Key Battery of a Renault Trafic 3
How to Change the Key Battery of a Renault Trafic 3
Renault Trafic (2014-2026 / MK 3) To change the battery of your Renault Trafic third series key yourself, follow the procedure described in this guide. First, ensure you have a flat-h…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos