Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the spark plug and resistor on a Renault Trafic

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Blower motor

In this video we can see the deep satisfaction of a user who managed to change the fan and resistor from the hood of their Renault Trafic by themselves; in fact, from the hood of the vehicle we can see the resistor right in front of us, we can see it in the footage, it is right in front of our eyes. It's just a little difficult to unscrew, but nothing that can't be done. Then we will remove the fan and change the wire that connects the resistor to the fan, then we will reassemble the resistor and fan, and at this point the fan works perfectly, with a cost of 39 euros compared to the 500 that were requested at the workshop.

Posted on 31 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change a tire on a Renault Trafic II
How to change a tire on a Renault Trafic II
Renault Trafic (2001-2014 / MK 2) Let's see that changing a tire on a Renault Trafic II is not as problematic as it seems: we take out the kit from under the seat to do the job, while…
How to change the cabin filter of a Renault Trafic III
How to change the cabin filter of a Renault Trafic III
Renault Trafic (2014-2026 / MK 3) In this video, we see how to change the cabin air filter of a Renault Trafic III: we need to remove the lower panel of the dashboard under the glove …
How to change the rear bulbs of the Renault Trafic version 2
How to change the rear bulbs of the Renault Trafic version 2
Renault Trafic (2001-2014 / MK 2) In this video we can see how to change the bulb of the rear lights on the Renault Trafic 2, we need to open the trunk, and unscrew the headlight bloc…

How to Remove and Install the External Wing Mirror on a Volkswagen Tiguan

Here’s how to remove and install the external wing mirror on a Volkswagen Tiguan (passenger side). After removing the door panel: disconnect the battery terminals, unscrew the fastening pins of the mirror using the appropriate socket. Once the fastening pins are removed: take out the mirror with the electric adjustment wires from the car door. To reassemble: refit the mirror with the pins, the electric adjustment wires, and the plastic panel of the door. Finally, test the correct operation of the mirror.

Watch the video!


by ScegliAuto

More videos