Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the cabin filter of a Renault Trafic III

Model: Renault Trafic MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Cabin air filter

See other generations:
Video tutorial

In this video, we see how to change the cabin air filter of a Renault Trafic III: we need to remove the lower panel of the dashboard under the glove compartment, on the passenger side. Here below we see the housing of the pollen filter flange: just tighten the two tabs on the cover to remove it, and consequently remove the filter.

Clean the container well from dust and residue before placing the new and clean filter in its place, but pay attention to the mounting direction before placing it. Close the cap and put back the panel that we had previously removed. Operation completed.


Posted on 2 September 2025 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Renault Trafic III
How to Replace the Cabin Filter on a Renault Trafic III
Renault Trafic (2014-2026 / MK 3) This guide shows how to replace the pollen filter on a Renault Trafic III. It is located behind the glove compartment, and you need to look on the ri…
Where Are the Fuel Filter and Filling Nozzles Located in the Renault Trafic 3?
Where Are the Fuel Filter and Filling Nozzles Located in the Renault Trafic 3?
Renault Trafic (2014-2026 / MK 3) The author of this video shows us quickly but thoroughly where some important elements of the Renault Trafic phase 3 are located. In particular, this…
How to Replace the Cabin Filter on the Renault Trafic 3
How to Replace the Cabin Filter on the Renault Trafic 3
Renault Trafic (2014-2026 / MK 3) If you own a Renault Trafic Mk3 (2014-2023) and want to replace the cabin air filter yourself, you just need to follow these steps to complete the op…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos