Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where Are the Fuel Filter and Filling Nozzles Located in the Renault Trafic 3?

Model: Renault Trafic MK 3 - Years 2014-2026
Part: Diesel fuel filter

The author of this video shows us quickly but thoroughly where some important elements of the Renault Trafic phase 3 are located. In particular, this concerns the fuel filter and the filling nozzles for the fuel and AdBlue tanks. The latter two are located next to each other, behind a flap found between the two doors on the passenger side. Distinguish the AdBlue nozzle by its smaller size and blue cap. The fuel filter, on the other hand, is located underneath the vehicle, in a fairly easy-to-reach position.

Posted on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Filter on the Renault Trafic
How to Replace the Diesel Filter on the Renault Trafic
Renault Trafic (2001-2014 / MK 2) To replace the diesel filter on the Renault Trafic, open the bonnet, locate the diesel filter behind the headlamp on the passenger side (behind the s…
How to Change the Diesel Filter on Trafic
How to Change the Diesel Filter on Trafic
Renault Trafic (2001-2014 / MK 2) Do you want to replace the diesel filter? Let's look at removing the diesel filter from inside the engine bay of the Renault Trafic. Lift the bonnet,…
How to change the diesel filter of the Renault Trafic
How to change the diesel filter of the Renault Trafic
Renault Trafic (2014-2026 / MK 3) In this video, we will see how to change the diesel filter of the Renault Trafic: we open the hood and equip ourselves with a T30 hex key; the filter…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos