Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuel filter located on the Renault R 21?

Model: Renault R21 MK 1 - Years: 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Fuel filter

Video tutorial

The gasoline fuel filter on a Renault R 21 vehicle is located under the front hood. Specifically, the filter is mounted above the engine to ensure proper filtration of the gasoline.

The filter should be replaced at least once a year during the car service, even if the vehicle is used infrequently, and it is necessary to replace it as soon as we start using the vehicle. Given the position of the filter, it is possible to follow its replacement independently.

The cost of the filter varies depending on the model and the year of production of the vehicle.


Posted on 11 December 2025 by ScegliAuto


Related tutorials

How to Replace the Front Suspension on a Renault R21
How to Replace the Front Suspension on a Renault R21
Renault R21 (1986-1995 / MK 1) In this guide, we will discover the steps to disassemble and replace the front suspension on a Renault R21. First, lift the vehicle and start disconn…
Replacing the Front Brake Pads
Replacing the Front Brake Pads
Renault R21 (1986-1995 / MK 1) Loosen the wheel nuts and lift the vehicle securely. Unscrew the bolts and remove the wheel. Disconnect the electrical cable. Unscrew the two retaini…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos