Do it yourself
Frequently asked questions about cars and motorcycles

How to change the oil in the Renault Scenic II

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Engine oil

In this video we can see how to change the oil and filter on the Renault Scenic II dDI; we open the hood, open the oil filler cap, lift the front of the car to access the drain plug, after removing the plastic protection. We drain the used oil into a suitable container, which we will then dispose of at an authorized center. We access the filter from above, and when we remove it, we should point it upwards to avoid oil dripping onto the engine. We put the new filter in place, lubricating the gasket with new oil, and screwing it in place. We replace the plug and gasket under the car, and put the plastic cover back on. We lower the car and start refilling the oil with 90% of the necessary quantity, then we measure the level; adjust accordingly. We close the cap, start the engine and keep it running for 30 seconds, to allow the filter to fill up and measure the oil level again. The optimal level is close to the maximum, but be careful not to exceed it.

Posted on 19 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) To manually release the handbrake on the Renault Grand Scenic, follow the steps shown in the video. First, press the brake pedal: while holding it do…
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) If you want to quickly locate the OBD port of your Renault Scenic Mk3, all you have to do is carefully follow the instructions described in this new …
Renault Scenic (2003-2009 / MK 2, Scenic 2) Today we will discover the instructions that will allow us to reset the maintenance reminder for the oil change of the Renault Scenic. First, we get …

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos