Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the timing belt of the 1.5 Dci Renault K9K

Model: Renault Renault Various
Part: Timing belt

Video tutorial

In this video we can see a nice animation that shows us in detail how to change the timing belt of a Renault 1.5 DCi K9K engine: after removing the cover, we see the alignment of the timing marks, where we will need to place the pins or bolts to hold the pulleys in place.

This is the most delicate operation to perform, and it will allow us to restart the belt from the correct position; we also need to consider the marks on the belt itself that must match the notches on the pulleys.

Remember that it is also advisable to change the tensioner pulley along with the belt.


Posted on 31 October 2024 by ScegliAuto


Related tutorials

When and How Should I Change the Timing Belt on My Renault with a 1.5 DCI Engine?
Renault Renault Various Following this short video, you will learn how and when to change the timing belt on your Renault with a 1.5 DCI engine, but the same procedure appli…
Inside a Renault 1.5 dCI K9K Engine
Inside a Renault 1.5 dCI K9K Engine
Renault Renault Various In this video, see the internal structure of a Renault 1.5 dCI K9K engine, which is fitted in various vehicles (including Nissan, Dacia, Mercedes). W…
Essential tools for changing the oil of the Renault 1.5 dCi K9K engine.
Essential tools for changing the oil of the Renault 1.5 dCi K9K engine.
Renault Renault Various In this short video, we will see which tools are essential for changing the oil on a Renault 1.5 dCi K9K engine: first of all, we need a 76 mm 12-gro…

Other guides you may be interested in

Where is the Battery Located in a Toyota RAV4 Hybrid?

In this video, see where the battery is located in a Toyota RAV4 Hybrid, useful in case you need to replace it or perform an emergency start. As shown, it is positioned at the rear of the vehicle, specifically at the base of the right wall of the boot. To access it, first remove the floor panel, then disassemble the right drawer and subsequently the small glove compartment. To remove it, simply unscrew the two bolts of the upper bracket and disconnect both terminals, always starting with the negative.

Watch the video!


by ScegliAuto

More videos