Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the air filter located in the Renault Clio?

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Air filter

See other generations:
Video tutorial

This video shows where the air filter is located in the Renault Clio and how to proceed if you need to replace it, a very simple and quick operation. As shown, the filter is positioned on the left side of the engine, to your right when facing the vehicle.

To replace it, start by opening the engine compartment, then disconnect the front intake hose from the box, and using a 10mm socket spanner, undo the two rear fixing bolts. At this point, remove the old filter, insert the replacement, and reassemble everything by following the reverse procedure.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the 2012 Renault Clio
How to Replace the Air Filter of the 2012 Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Replacing the engine air filter of your 2012 Renault Clio III is quite simple. Follow the procedure below to complete the task without any difficulty…
How to Change the Engine Air Filter on a Renault Clio 4
How to Change the Engine Air Filter on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the engine air filter on your Renault Clio fourth generation by yourself, you only need a few minutes. All you have to do is read the foll…
How to Replace the Air Filter in a Renault Clio 4
How to Replace the Air Filter in a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The video illustrates how to replace the air filter in a fourth-generation Renault Clio. First, switch off the vehicle and remove the key, then open …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos