Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the maintenance interval counter

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Warning Light - Car Error Code

Once the instrument panel is turned on, you will have to act on the right control of the steering column, (wiper lever) which has a button at its end that controls the on-board computer of the car. Press it repeatedly until in the central display between the speedometer and the tachometer, appears the wording concerning the maintenance interval and in particular the oil change. By keeping the button pressed for about 4 seconds, it will be possible to reset the counter displayed in the panel. To be sure that you have operated correctly, observe the display as it must flash several times before marking the new maintenance interval. Start the car.


Posted on 26 June 2023 by ScegliAuto



How to reset the service light of the Renault Megane II
Renault Megane (2002-2010 / Megane 2) In this video we can see how to reset the service light on a Renault Megane II: we need to first act with the button located on the satellite of the
How to reset the service interval on a Renault Megane 4
Renault Megane (2015-2023 / Megane IV, Megane 4) Through this very useful tutorial, you will be able to see the necessary procedure to reset the service interval on a Renault Megan 4. First of all,
How to reset the service light on the Megane 3
Renault Megane (2008-2015 / Megane 3, Megane III) This video illustrates how to reset the maintenance light on the Renault Megane 3. This procedure is very simple and quick to do and does not require

    Frequently Asked Questions

    • Megane 2015-2023 - How to know the radio code in a Renault Megane? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos