Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Renault Clio key remote battery

Model: Renault Clio Clio V, Clio 5 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

Today we will discover the main information that will allow us to disassemble and replace the battery of the remote key of the Renault Clio. First, we take our remote control and start removing the rear plastic cover of the remote control, levering on the side slot; in this way it will be possible to access the battery compartment, as shown in the video.

At this point, we remove the battery and replace it with the new one, of the right type (in this case a CR 2032 3V); insert it in the correct direction and then secure the cover and test its operation.


Posted on 22 February 2025 by ScegliAuto


Related tutorials

Replacing the Key Fob Battery for the Renault Clio
Replacing the Key Fob Battery for the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Here are the steps to disassemble and replace the battery of the key fob for the Renault Clio, as well as the Captur. First, take your key fob and re…
How to Replace the Remote Battery in a Renault Clio
How to Replace the Remote Battery in a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the battery in the remote of a new generation Renault Clio mk4, use a flat-head screwdriver to lift the battery cover and replace the batt…
How to Open the Doors with a Flat Remote Battery on a Renault Clio
How to Open the Doors with a Flat Remote Battery on a Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Today's instructions will allow you to open the doors of a Renault Clio with a flat remote battery. First, take your remote and extract the physical …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos