Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Renault Maxity?

Model: Renault Renault Various
Part: Service warning light

In order to reset the Service light of the Renault Maxity, you need to press and hold the button located in the bottom left of the instrument panel while the panel is off. While continuing to hold the button, you can insert the ignition key and turn it clockwise to turn on the panel. This will make the maintenance interval start flashing, and you can modify it by pressing the same button repeatedly. You can then release the button to confirm the change and turn off the instrument panel.

Posted on 3 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Renault Maxity?
How do you reset the Service light on the Renault Maxity?
Renault Renault Various To reset the Service light that appears on the instrument panel of the Renault Maxity, you must insert the ignition key into the ignition switch, tur…
Where Can We Find the Fuse Diagram in the Renault Maxity?
Where Can We Find the Fuse Diagram in the Renault Maxity?
Renault Renault Various The fuse diagram for the Renault Maxity can be viewed in the attached video, which explains each fuse, its amperage, what it protects, and the exact …
Results of the crash test on the Renault Maxity batteries
Results of the crash test on the Renault Maxity batteries
Renault Renault Various The Renault Maxity is a light transport vehicle produced by Renault, which was produced until 2019, and had both a diesel engine and a fully electric…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos