Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to solve the problem of the heating fan not working on the Renault Clio MK3

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Blower motor

See other generations:
Video tutorial

In this video, we will see how to solve the problem of the heating fan not working on the Renault Clio III: in fact, in this case it only works on speed 3 and not on any other. The problem in this case should be the connector plug that goes to the resistor.

If the problem is not too serious, we can try to clean them, and to do this we open the dashboard panel, which is located on the left side of the car. We will find a screw to remove, once the panel is removed. Then we remove the plastic trim of the dashboard, and underneath we find three screws that we will unscrew, and we will find another one inside the glove box. At this point we can remove the glove box itself, and expose the resistor which is the one with the colored wires.

Disconnect it and clean it or replace it.


Posted on 2 June 2025 by ScegliAuto


Related tutorials

How to repair the heater of the Renault Clio MK3
How to repair the heater of the Renault Clio MK3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) How to repair the heating fan of the Renault Clio MK3, which works at all speeds except the highest one? Let's see in this video, which is facilitate…
How do you remove the cabin fan in the Renault Clio 3?
How do you remove the cabin fan in the Renault Clio 3?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Operating the heating control of a car's cabin and realizing that nothing happens, can mean that there is a problem with the controls themselves or w…
How to solve the problem of malfunctioning rear lights of the Renault Clio
How to solve the problem of malfunctioning rear lights of the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video, we will see how to solve the problem of malfunctioning rear lights of the Renault Clio: the problem could be faulty ground cables, as …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos