Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Renault Trafic

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight bulb

See other generations:
Video tutorial

The following video tutorial shows us the steps to replace the headlight bulb of a Renault Trafic car. The first step is to park the car on a flat surface, pull the lever of the front hood, and lift the hood. The second step is to remove the cap from the light fixture.

The third step is to disconnect the connector from the bulb. The fourth step is to press on the sides of the bulb to remove it and proceed with the replacement.

After inserting the new bulb, we move on to the fifth step. The fifth step is to connect the connector to the bulb and close the cap of the light fixture.

We then close the front hood and turn on the car lights to test the bulb's functionality. If necessary, we also replace the bulb of the left headlight following the same steps.


Posted on 25 July 2025 by ScegliAuto


Related tutorials

Replacing the Dipped Beam Bulb of the Front Headlamp on the Renault Trafic
Replacing the Dipped Beam Bulb of the Front Headlamp on the Renault Trafic
Renault Trafic (2001-2014 / MK 2) Here are the step-by-step instructions on how to remove and replace the dipped beam bulb of the front headlamp on the Renault Trafic. First, open the…
How to Replace the Dipped Beam Bulb on Renault Trafic
How to Replace the Dipped Beam Bulb on Renault Trafic
Renault Trafic (2001-2014 / MK 2) This brief guide shows how to remove and replace the dipped beam bulb of the front headlight on the Renault Trafic. First, open the bonnet and remove…
How to Replace the Headlight Bulb on a Renault Trafic 3?
How to Replace the Headlight Bulb on a Renault Trafic 3?
Renault Trafic (2014-2026 / MK 3) Fortunately for us, the job we are about to describe here does not require much time or the use of tools; it is simple and within everyone's reach. T…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos