Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear knob of the Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Shift knob

Today's instructions will allow us to disassemble and replace the gear lever knob of the Renault Clio. First, we get into the car and start by disconnecting and removing the gear lever boot from the base; then we pull the knob upwards with force to detach and remove it, pulling it out together with the boot, as shown in the video. At this point, we separate the knob from the gear lever boot, replacing the components with new ones; we first reassemble the boot and then the knob on the lever, securing them in such a way as not to create play between the various components.

Posted on 1 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Gear Knob of a Renault Clio
How to Remove the Gear Knob of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Before you begin, sit in the driver's seat of your Renault Clio. Start by prising off and lifting the lower section of the gear lever gaiter. Next, g…
How to replace the gear knob of the Renault Clio
How to replace the gear knob of the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) If the gear knob in your Renault Clio is excessively worn and you want to replace it with a new one, simply read the following guide carefully and fo…
How do you replace the gear knob of the Renault Clio?
How do you replace the gear knob of the Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) It will be possible to replace the gear knob of the Renault Clio by grabbing the old component so that it can be rotated counterclockwise: while perf…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos