Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the Renault Captur.

Model: Renault Captur MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

Today we will see how to reset the tire pressure sensors on a Renault Captur vehicle. Before performing the reset of the warning light, it is important to update the tire version after a replacement or a check by adjusting the pressure according to the instructions provided by the manufacturer on labels located on the front door.

To reset the warning light, we need to turn on the instrument panel and press the "TPMS reset" button located on the central dashboard. By doing this and holding down the button, we will initiate the tire pressure update; when the vehicle emits a sound, the reset is complete.


Posted on 30 November 2025 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a Renault Captur
How to Reset the TPMS Light on a Renault Captur
Renault Captur (2019-2026 / MK 2) After inflating all four tyres and checking them according to the instructions on the stickers located on the door sills, you can reset the TPMS ligh…
How to reset the TPMS light on a Renault Captur
How to reset the TPMS light on a Renault Captur
Renault Captur (2019-2026 / MK 2) The TPMS warning light comes on in a Renault Captur when it is necessary to adjust the tire pressure. Once the tire pressure has been adjusted, follo…
How to Reset the TPMS Light on Renault Captur 2019
How to Reset the TPMS Light on Renault Captur 2019
Renault Captur (2019-2026 / MK 2) The procedure to manually reset the tyre pressure monitoring system (TPMS) light on your Renault Captur is quite simple and takes just a few seconds …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos