|
Do it yourself
| |||
| ||||
How to remove the seats on the Renault Clio II.
Model: Renault Clio
MK 2, Clio 2
- Years:
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Video tutorial
Let's see in this video how to remove the seats from the Renault Clio II: we will start with the method without sliding. From the center, we will remove the bolt located on the outer side, both the one at the front and the more inner ones at the back, one just before and one just after the seatbelt attachment. On the door side, we need to open the back door and remove the screw located at the back of the plastic trim of the front seat, which can be loosened to access the front screw located inside, and a third screw approximately halfway up the partition, which we can remove, thus also removing the seat. If the seat has sliding functionality, we need to lift the car a little: underneath, we will find two rubber caps that we will remove. Inside, we will find a 13mm nut. Moving towards the middle of the vehicle, we will find two holes with two more nuts, and once these four nuts are removed, we will have also removed the seat.
Posted on 29 December 2025 by ScegliAuto
Related tutorials
Renault Clio
(2005-2013 /
Clio 3, MK 3, Clio III)
In this guide, we will see the main instructions that will allow us to disassemble and remove the rear seats of the Renault Clio, in simple steps. Fi…
Renault Clio
(2019-2026 /
Clio V, Clio 5)
In this short guide, you will find instructions to lower the rear seats or backrest of a Renault Clio in simple and quick steps. First, open the rear…
Renault Clio
(2019-2026 /
Clio V, Clio 5)
To fold down the rear seats of a Renault Clio, first ensure that the front passenger seats are pushed sufficiently forward. Also, make sure that the …
Other guides you may be interested in |
How to Reset the AdBlue Warning Light on a Peugeot Boxer
To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |