Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Radio Fuse on a Renault Clio 3?

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Car stereo

The radio fuse on a Renault Clio MK3 is located inside the fuse box in the cabin. Specifically, the box is behind the driver’s side glove compartment. To replace the fuse, remove the cover of the box and use needle-nose pliers to remove the fuse. Remove fuse F12 rated at 15 amps and insert a new fuse of the same rating. Close the cover of the box and test the radio operation; if it does not work, check the condition of the internal connectors.

Posted on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse for the cigarette lighter socket in the Renault Clio 4?
Where is the fuse for the cigarette lighter socket in the Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today, we will explain how to replace the fuse related to the operation of the cigarette lighter socket in the Renault Clio model 4. It is fuse numbe…
Where is the Air Conditioning Fuse on a Renault Clio?
Where is the Air Conditioning Fuse on a Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The fuse related to the operation of the air conditioning on a Renault Clio mk4, produced from 2012 to 2019, is located inside the fuse box situated …
How to Replace the Car Radio Fuse in a Renault Clio
How to Replace the Car Radio Fuse in a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Before you can start, sit in the driver's seat of your Renault Clio. Begin by prising off and removing the cover of the fuse box, located near the lo…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos