Do it yourself
Frequently asked questions about cars and motorcycles

What is the Fuse Diagram for the Renault Clio?

Model: Renault Clio Clio V, Clio 5 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Fuse box

See other generations:
Video tutorial

This video shows where the fuse boxes are located in the Renault Clio and their respective diagrams, useful in case you need to check the fuses of a malfunctioning device. The first box is found inside the engine compartment, protected by the black plastic cover next to the battery.

The second box is located inside the cabin, behind the small door in the lower left area of the dashboard, on the driver's side. In case of blown fuses, make sure to use replacements with equivalent specifications and always work with the vehicle turned off.


Posted on 31 March 2026 by ScegliAuto


Related tutorials

Renault Clio (1990-1998 / Clio 1, MK 1) This guide provides instructions on where to find the fuse boxes and how to obtain the diagram for the Renault Clio. First, open the bonnet and start…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The video below illustrates the diagram of the fuse boxes of the Renault Clio MK4. The diagram is useful in case the car has electrical problems rela…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today's guide will show you where to find the external fuses and how to obtain their diagram for the Renault Clio, in simple steps. First, open the b…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What is the location of the wiper fuse on the Renault Clio? Read answer
    • Clio 2012-2019 - Where is the horn relay on the Renault Clio IV located? Read answer
    • Clio 2012-2019 - Where is the fuel pump fuse on Renault Clio? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos