Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wipers on a Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Windshield wipers

In this guide, you will find instructions to remove and replace the front wipers on a Renault Clio. First, move to the front of the vehicle and lift the arm of the front wiper; then release the plastic clip of the wiper by rotating it to detach it from the arm, as shown in the video. At this point, install the new front wiper of the correct type and size; secure the plastic clip and lower the wiper onto the windscreen, replacing the other wipers in the same manner.

Posted on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Blades on a Renault Clio 3
How to Replace the Wiper Blades on a Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Wiper blades on a Renault Clio 3 should be replaced at least once a year because external agents like rain, hail, and humidity can damage them. Malfu…
How to Replace the Wiper Blades on the Renault Clio
How to Replace the Wiper Blades on the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To replace the wiper blades on the Renault Clio, lift the arms to which the blades are attached. Once the blades are raised along with the arms, lift…
How to Replace the Windscreen Wiper Motor on a Renault Clio
How to Replace the Windscreen Wiper Motor on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) This guide shows you how to remove and replace the windscreen wiper motor on a Renault Clio, following the instructions below. First, open the bonnet…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos