Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blades on a Renault Clio 3

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield wipers

See other generations:
Video tutorial

Wiper blades on a Renault Clio 3 should be replaced at least once a year because external agents like rain, hail, and humidity can damage them. Malfunctioning blades can scratch the glass and not work properly when needed.

To replace the wiper blades on a Clio mk3, you need to: - position the blades vertically using the left lever; - lower the clips on both blades to remove them; - insert the new blades and raise the clips; Repeat the same operation on the rear blade.


Updated on 8 September 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on a Renault Clio
How to Replace the Wiper Blades on a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Replacing the front wiper blades on a Renault Clio is very simple. The first step is to lift both wipers off the windscreen. The second step is to pr…
How to Replace the Wiper Blades on the Renault Clio
How to Replace the Wiper Blades on the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the wiper blades on the Renault Clio, lift the arms to which the blades are attached. Once the blades are raised along with the arms, lift…
How to replace the windshield wiper of the Renault Clio 4
How to replace the windshield wiper of the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today we will explain how to replace the windshield wiper blades of the Renault Clio model 4. Lift the wiper arm and grip the two plastic tabs locate…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos