Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blades on a Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Windshield wipers

Replacing the front wiper blades on a Renault Clio is very simple. The first step is to lift both wipers off the windscreen. The second step is to press on the sides of the blade to release it; perform the same operation on the right blade. The third step is to insert the new blade into the arm. To do this, slide the blade onto the arm. Repeat the same operation on the right arm. Finally, check that the new blades are properly fitted by using them on the windscreen.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Blades on a Renault Clio 3
How to Replace the Wiper Blades on a Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Wiper blades on a Renault Clio 3 should be replaced at least once a year because external agents like rain, hail, and humidity can damage them. Malfu…
How to Replace the Wiper Blades on a Renault Clio 4
How to Replace the Wiper Blades on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this short video tutorial, you will learn how to remove and replace the wiper blades on a fourth-generation Renault Clio, by following these simpl…
How to Replace the Wiper Blades on a Renault Clio 3
How to Replace the Wiper Blades on a Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) .. In this video tutorial, you can see how to replace the wiper blades on a Renault Clio 3, following some simple steps that will allow you.. …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos