Do it yourself
Frequently asked questions about cars and motorcycles

Where are the Fuses in the Renault Megane?

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Fuse box

The specific fuse boxes installed inside the Renault Megane contain the fuses responsible for the operation of the devices. In this type of car, you can find boxes: one inside the cabin and one in the engine compartment. The first will be located behind a panel positioned low on the left side of the steering column. By removing the panel, you can access the fuses, while the second box is located high on the right, immediately below the windscreen, inside the engine compartment. Inside, there will be fuses for the windscreen wipers, fog lights, etc.

Posted on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) Each fuse in the Renault Megane is responsible for regulating the operation of a device installed on board the vehicle: the fuses will in turn be pos…
Renault Megane (2008-2015 / Megane III, Megane 3) The fuses in the Renault Megane 3 are located inside the fuse boxes, as in any other car. There are two: one is installed in the engine compartment n…
Renault Megane (2002-2010 / Megane 2) You can find the fuses for the Renault Megane inside the corresponding fuse boxes installed on the vehicle: in this type of vehicle, there are two bo…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the Renault Megane air conditioning fuse located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos