Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulbs on a Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

Learn how to replace the front headlamp bulbs on a Renault Clio. Open the bonnet (by pulling the lever located at the bottom right of the dashboard) and secure it. Locate the rubber inspection cap and remove it (located at the rear of the headlamp).

Disconnect the bulb holders inside the headlamp and extract the damaged bulb.

Fit the new bulb (ensuring it is the correct type and size) and insert the bulb holder back into the headlamp housing. Finally, close the rear of the headlamp with the rubber inspection cap and test the lights for proper operation.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

Removing the Front Headlamp Bulb from a Renault Clio
Removing the Front Headlamp Bulb from a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Are the front headlamp bulbs blown? Lift the front bonnet of the car and locate the back of the headlamp. Find the inspection cover and remove it. Pu…
How to Remove the Front Headlamp Bulbs on a Renault Clio
How to Remove the Front Headlamp Bulbs on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) See how to remove the front headlamp bulbs on a Renault Clio. Open the bonnet by pulling the bonnet release lever and secure it. Remove the cap that …
Replace the Lights on Renault Clio 4
Replace the Lights on Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Want to replace the front headlamp bulbs? Here’s how to remove the bulbs from inside the front headlamp. Lift the front bonnet to access the headlamp…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos