Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Gear Shift Knob on the Renault Twingo

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Shift knob

See other generations:
Video tutorial

In this brief guide, learn how to disassemble and replace the gear shift knob of the manual gearbox on the Renault Twingo. First, get inside the cabin and start by detaching and removing the gear gaiter, levering from the sides.

Detach any clip located between the gaiter and the knob, pulling the latter upwards until it detaches and removes, as shown in the video. At this point, install the gaiter in order and then the knob, securing everything with a clip; ensure there is no play between the lever and the knob!


Posted on 30 September 2026 by ScegliAuto


Related tutorials

Renault Twingo (1993-2007 / Twingo 1) The following steps will guide you on how to remove and replace the gear knob on a Renault Twingo. First, get inside the vehicle and start by detachi…
Renault Twingo (1993-2007 / Twingo 1) This brief guide will show you the steps to remove and replace the automatic gear knob on the Renault Twingo. First, get inside the vehicle and pull …
Renault Twingo (2007-2014 / Twingo 2) To correctly replace the gear knob of your Renault Twingo second series takes just a few seconds. All you need to do is carefully read the following …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos