Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the front swinging arm on Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Control arm

Remove the wheel covers of the front wheels, loosen the fixing bolts of the same and lift the car with a jack (if you have two, use both, one on each side). Unscrew the bolts completely until they are removed. Remove the mudguards by unscrewing the screws. Then remove the bolts that secure the metal plate to the lower frame. Disassemble the latter. Detach the steering head from the hub holder. Using a size 18 socket wrench, unscrew the first bolt relating to the swinging arm. Proceed with the other nuts and bolts present in the fixing points of the arm. Detach the same from the hub holder (if possible use an extractor) and remove it.

Posted on 7 January 2021 by ScegliAuto

Video tutorial

Related tutorials

Replace headlight bulbs on Renault Clio
Replace headlight bulbs on Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Disassembly of the front bulbs of the Renault Clio, let's see how to change them from the headlights. Let's lift the front hood of the car, let's sec…
Renault Clio 3 interior fan repair and disassembly
Renault Clio 3 interior fan repair and disassembly
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Let's see in this video how to repair the passenger compartment fan of a Renault Clio third series. First of all, let's first disconnect the two batt…
How to remove the front seat of a Renault Clio
How to remove the front seat of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) How to remove the front seat of a Renault Clio? Let's see how to disassemble the seat: first we move the seat back (with the metal handle) and bring …

How to Remove the Distributor from a Fiat Panda

How to remove the distributor from a Fiat Panda? Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation pipe, remove the engine soundproofing panel and the cap (detach it). Start by unscrewing the fastening pins of the distributor (as shown in the video); remove the distributor from the engine housing. Install a new distributor inside the engine bay, connect the various cables and close with the cap. Refit all previously removed parts (soundproofing panel, filter, etc.) and test the correct operation.

Watch the video!


by ScegliAuto

More videos