Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Armrest on the Centre Tunnel of a Volkswagen Golf

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Center console tunnel

Let’s see how to remove the armrest on the centre tunnel of a Volkswagen Golf. Unscrew the securing screws (located inside the cup holder) with a screwdriver; use a plastic lever to pry off the cover at the rear of the centre tunnel (air vents). After removing the plastic cover, unscrew the securing bolts in the centre armrest using a socket wrench. Once this is done, pull off the tunnel and disconnect any power cables. Finally, insert the new part into the centre tunnel, and reassemble all components of the glove compartment as previously disassembled.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Armrest of a Volkswagen Golf
How to Remove the Armrest of a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this video, see how to remove the armrest of the centre tunnel cover of a Volkswagen Golf. Position the armrest vertically, then use a socket wren…
How to Remove the Armrest on a VW Golf
How to Remove the Armrest on a VW Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Here’s how to remove the armrest located above the centre tunnel of a Volkswagen Golf Mk7. Move the leather armrest forward, then remove the air vent…
How to Remove and Replace the Armrest Compartment of a Volkswagen Golf
How to Remove and Replace the Armrest Compartment of a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Learn how to remove and replace the armrest compartment located above the central tunnel of a Volkswagen Golf. Position the armrest vertically; remov…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos