Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Air Vents on a Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Air vents

These simple steps will show you how to remove and replace the rear air vents on a Volkswagen Golf. First, climb into the back of the vehicle and begin to pull upwards on the plastic panel of the centre tunnel, along with the air vents, until it detaches and can be removed; then separate the air diffusers from the tunnel panel, replacing them if necessary with new ones (or repair them), as shown in the video. Now reinstall the panel along with the air vents, checking their proper operation!

Posted on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Air Vents on the Volkswagen Golf
How to Replace the Rear Air Vents on the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Below are the instructions to remove and replace the rear air vents of the centre tunnel on the Volkswagen Golf. First, get inside the cabin and star…
Removing the Rear Air Vents from a Volkswagen Golf 5
Removing the Rear Air Vents from a Volkswagen Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this video guide, you will see instructions on how to remove the rear air vents from a fifth series Volkswagen Golf. First, access the rear of the…
Removing the Rear Air Vents on Volkswagen Golf 7
Removing the Rear Air Vents on Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this short video, we will see how to remove and reinstall the rear air vents of the central tunnel on a seventh-generation Volkswagen Golf, as wel…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos