Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Air Vents on the Volkswagen Golf 7

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Air vents

In today's video tutorial, you will learn how to remove and replace the rear air vents on the seventh generation Volkswagen Golf, as well as on the Tiguan, Touran, and Passat. First, access the rear of the vehicle and start by moving the armrest forward; then, lever the air vent system to detach and remove it, as shown in the video. At this point, separate the air diffusers, replacing them with new ones; then, simply reassemble everything by following the reverse procedure of disassembly!

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Air Vents on the Volkswagen Golf
How to Replace the Rear Air Vents on the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Below are the instructions to remove and replace the rear air vents of the centre tunnel on the Volkswagen Golf. First, get inside the cabin and star…
Removing the Rear Air Vents from a Volkswagen Golf 5
Removing the Rear Air Vents from a Volkswagen Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this video guide, you will see instructions on how to remove the rear air vents from a fifth series Volkswagen Golf. First, access the rear of the…
Removing the side air vents from the Volkswagen Golf
Removing the side air vents from the Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In today's tutorial video, we will see the instructions to remove and replace the side air vents of the Volkswagen Golf. First, get inside the vehicl…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos