Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Air Vents on the Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Air vents

See other generations:
Video tutorial

Below are the instructions to remove and replace the rear air vents of the centre tunnel on the Volkswagen Golf. First, get inside the cabin and start removing all components of the centre tunnel by unscrewing the screws located under the plastic covers; then remove the tunnel and the air vents, disconnecting the various connectors underneath, as shown in the video.

At this point, a new model of air vents, with a USB port located underneath, will be specifically installed.


Posted on 4 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Air Vents on a Volkswagen Golf
How to Replace the Rear Air Vents on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) These simple steps will show you how to remove and replace the rear air vents on a Volkswagen Golf. First, climb into the back of the vehicle and beg…
How to Replace the Rear Air Vents on the Volkswagen Golf 7
How to Replace the Rear Air Vents on the Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In today's video tutorial, you will learn how to remove and replace the rear air vents on the seventh generation Volkswagen Golf, as well as on the T…
How to Remove the Air Vents on a Volkswagen Golf 4
How to Remove the Air Vents on a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Learn how to remove the air vents (side) on a Volkswagen Golf. Use multiple levers to remove the vents. Pry at the top and bottom with the levers (as…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos