Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Glow Plugs on Renault Clio and Nissan Qashqai 1.5 DCi

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Glow plugs

In this video tutorial, you will learn how to remove and replace the glow plugs on a Renault Clio third series 1.5 DCi, as well as on other Renault models with the same engine and some Nissan models such as the Juke and Qashqai. First, open the engine bonnet and remove the two intake hoses by unscrewing the clamp screws; then remove the clips and take off the engine protection cover. At this point, disconnect the electrical connectors of the glow plugs and unscrew them using a socket wrench; follow the video until the end for the replacement!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Glow Plugs on a Renault Clio 3
Replacing Glow Plugs on a Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Through this very short video guide today, you can see the entire step-by-step procedure for replacing the glow plugs on a Renault Clio, third genera…
Replacement of the timing belt of the Renault Clio 1.5 dCi
Replacement of the timing belt of the Renault Clio 1.5 dCi
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Below we will discover the information that will illustrate the procedure for dismantling and replacing the timing belt of the Renault Clio 1.5 dCi. …
Replacing the Air Filter of the Renault Clio 1.5 dCi
Replacing the Air Filter of the Renault Clio 1.5 dCi
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today, we will discover the steps and procedure for removing and replacing the air filter of the Renault Clio 1.5 dCi. First, open the bonnet of the …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos