Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the rear bumper on Renault Clio 182

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Rear bumper

Start by opening the trunk and removing the license plate light located in the rear bumper and disconnecting its connector. Now work in the wheel arches, moving them and unscrewing the two screws on each side, one 6 and one 10 mm, hidden behind the protection. Raise the car with a jack in order to access the part under the bumper: unscrew the screw and the clips that secure it in the aforementioned area. So unscrew the two torx t30 present in the upper part of the bumper, under the gasket. Remove the rear bumper by hand by pulling it a little at a time with your hands, without damaging the interlocking hooks.

Posted on 11 February 2021 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Wiper on Renault Clio
Removing the Rear Wiper on Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Removing the wipers on Renault Clio, let’s see how to replace the blades. Take the rear wiper arm with your hands, lift the plastic cover and unscrew…
Removing the exterior mirror on the Renault Clio 3
Removing the exterior mirror on the Renault Clio 3
Renault Clio (2005-2013 / Clio 3, Clio III, MK 3) In this video we will see how to remove the exterior mirror on a Renault Clio third series, in simple steps. First we open the front door from the af…
Removal of the bumper and headlight on Renault Clio 3
Removal of the bumper and headlight on Renault Clio 3
Renault Clio (2005-2013 / Clio 3, Clio III, MK 3) If you want to remove the headlights on Renault Clio 3 you must first remove the bumper. To do this, lift the vehicle and unscrew the bolts below it …

Other guides you may be interested in

Reset Tyre Pressure Light Toyota Yaris 2016

Due to advancements in onboard electronics, many vehicles are equipped with various sensors that monitor several operating parameters, including tyre pressure. Even if the pressure is correct, the warning light may sometimes illuminate on the dashboard. First, check with a gauge that the pressure in all 4 tyres matches the manufacturer's specifications. For the 2016 Toyota Yaris, the values are as follows: Front: 2.2 bar for T-type tyres, 2.3 for H-type, 2.4 for W-type. Rear: 2.2 bar for all tyre types. To reset the pressure light, turn on the ignition with the key, locate the reset button under the steering column. Press it for 3 seconds, and the light will flash 3 times before turning off. Remove the key from the ignition and start the vehicle.

Watch the video!


by ScegliAuto

More videos