Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of a Renault Clio IV

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Rear bumper

Today, we will explain how to remove the rear bumper of a Renault Clio IV. To disassemble the bumper, open the boot and remove the covers from the screws that secure the rear light. Using a star screwdriver, unscrew the screws and remove the light, taking care not to damage the connector. Repeat the same procedure for the right rear light. Unscrew the bolts located on the wheel arch and detach the bumper. Repeat the same procedure to unscrew the bolts on the right side. Using a 5 mm socket wrench, unscrew the bolts located on the underside of the bumper. Applying slight outward pressure, detach the entire bumper from its housing and disconnect the central connector.

Posted on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear bumper on the Renault Clio?
How to remove the rear bumper on the Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this tutorial we can see how to disassemble the rear bumper in the Renault Clio, an extremely simple and quick operation. First, we lift the rear …
How do you remove the rear bumper of the Renault Clio?
How do you remove the rear bumper of the Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) It will be possible to remove the rear bumper of the Renault Clio by opening the rear hatch in order to access the screws next to the rear lights: on…
Removing the Rear Bumper of a Renault Clio
Removing the Rear Bumper of a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) How do you remove the rear bumper of a Renault Clio? Follow these steps, as this operation is not too complex. Using a screwdriver, unscrew the secur…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos