Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on a Renault Clio?

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Rear bumper

See other generations:
Video tutorial

In this tutorial, you will learn how to remove the rear bumper on a Renault Clio, a task that is extremely simple and quick. First, lift the rear of the vehicle.

Then, locate all the screws underneath the bumper and unscrew them using a T20 Torx screwdriver. Next, move to the wheel arch, unscrew the additional screws indicated, open the boot lid, and proceed to remove both lights.

At this point, simply unscrew the last bolts, separate the bumper from the chassis, and fit the replacement part by following the reverse procedure.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

How do you remove the rear bumper of the Renault Clio?
How do you remove the rear bumper of the Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) It will be possible to remove the rear bumper of the Renault Clio by opening the rear hatch in order to access the screws next to the rear lights: on…
Removing the rear bumper of the Renault Clio
Removing the rear bumper of the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Let's discover the steps and instructions that will allow us to remove and replace the rear bumper of the Renault Clio in simple steps. First, open t…
How to Remove the Rear Bumper of a Renault Clio IV
How to Remove the Rear Bumper of a Renault Clio IV
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today, we will explain how to remove the rear bumper of a Renault Clio IV. To disassemble the bumper, open the boot and remove the covers from the sc…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos