Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Bumper and Front Headlight on Renault Clio 3

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Front bumper

To remove the front headlights on a Renault Clio 3, you must first remove the bumper. To do this, lift the vehicle and unscrew the bolts underneath it, as clearly shown in the video. Now remove the clips securing the wheel arch liners, take them out and unscrew the hidden bolts. Next, unscrew the bolts located at the top of the bumper, near the engine bay. Once all the bolts shown in the video are removed, pull the bumper away from its housing. You can now remove the headlight by unscrewing the four bolts that secure it: two from the engine bay side and two near the wheel.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper on a Renault Clio
How to Remove the Front Bumper on a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Want to remove the front bumper on a Renault Clio? Let's see how to proceed with the disassembly in the video: open the bonnet by pulling the bonnet …
Replacing Headlights on Renault Clio
Replacing Headlights on Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Replacing the front headlight on a Renault Clio? Let’s look at how to remove the headlight. To remove the front headlight, you need to take off the f…
How to Remove the Front Headlight on a Clio
How to Remove the Front Headlight on a Clio
Renault Clio (1998-2005 / Clio 2, MK 2) How to remove the front headlight on a Renault Clio? Start by removing the front bumper to access the headlight. Using a battery-powered screwdriver …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos