Do it yourself
Frequently asked questions about cars and motorcycles

Replace Coolant Reservoir on Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Checks and maintenance

Is the coolant reservoir due for replacement? Let's see how to remove the reservoir from the Renault Clio. Lift the front bonnet of the car, locate the reservoir to be removed. Empty the reservoir of the existing liquid (disconnect the lower hose from the reservoir), using a socket or screwdriver, unscrew the securing bolts, and disconnect the circulation hoses from the reservoir. Install a new reservoir with the associated hoses and bolts. After securing all the hoses, top up the new coolant in the cooling system. Start the vehicle for a general functionality check.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws tha…
Renault Clio (1990-1998 / Clio 1, MK 1) In this video tutorial, you will learn how to remove the radiator fluid reservoir or expansion tank on the first series Renault Clio by following the…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this short and simple guide, we will see the process of disassembling and replacing the thermostat of the engine cooling liquid of the Renault Cli…

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 1998-2005 - Where is the heater resistor located on the Renault Clio mk2? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer
    • Clio 2005-2013 - What to do if the Renault Clio horn does not work? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos