Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light on Renault Megane 2

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Tail light bulb

Open the boot lid and manually unscrew the retaining clip of the affected rear light, then remove the lower round cover, which will allow you to access the second clip by unscrewing it. Once done, you can remove the light by hand, remembering to disconnect the two connectors, possibly using a flathead screwdriver for assistance. Unscrew the screw that secures the lamp holder at the back, remove the old bulb, and screw in the new bulb you purchased. Proceed in reverse for reassembly, reconnecting the two connectors and screwing in the various securing screws.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Dismantling the Rear Light of the Renault Megane 2
Dismantling the Rear Light of the Renault Megane 2
Renault Megane (2002-2010 / Megane 2) Today, we will see the main instructions for dismantling and replacing the rear light of the second series Renault Megane in simple and quick steps. …
Replacing the Rear Light Bulbs on a Renault Megane
Replacing the Rear Light Bulbs on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the rear light bulbs on your Renault Megane, follow these steps. Open the boot and use a lever to remove the plastic cover next to the boo…
Disassembly of the rear light and bulbs of the Renault Megane
Disassembly of the rear light and bulbs of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) In a few simple steps, we will see the process of how to disassemble and replace the rear light and its bulbs of the Renault Megane. First, open the …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos