Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulbs of the Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Tail light

Here’s how to replace the rear light bulbs of the Renault Megane when one of them has blown. Open the tailgate and position yourself in front of the affected light; in the internal trim, there are openings through which you can unscrew two plastic nuts that secure the light. Using a small flat-head screwdriver, gently push the edge outwards enough to grasp and unlock it from its housing. Once the light is removed, you can access the back where, after releasing three clips, you will remove the plate housing the bulbs. Replace the bulb and refit the light by reversing the previous steps.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Renault Megane 3
How to replace the rear headlight bulb of the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) If you want to replace one of the bulbs located inside the rear light of your Renault Megane Mk3, all you have to do is follow the procedure describe…
Replacing the Rear Light Bulbs on a Renault Megane
Replacing the Rear Light Bulbs on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the rear light bulbs on your Renault Megane, follow these steps. Open the boot and use a lever to remove the plastic cover next to the boo…
How to replace the rear headlight bulb on the Renault Megane
How to replace the rear headlight bulb on the Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) The information provided in this guide will show us how to disassemble and replace the rear headlight bulb of the Renault Megane. First, we open the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos