Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the rear lights bulb of the Renault Megane II

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Light bulb

See other generations:
Video tutorial

In this video we see how it is possible to easily change the rear light bulb of the Renault Megane II: we open the rear door and turn the knob located on the side corresponding to the plastic cover, inserted in the carpet, which is the opening to access the rear lights.

From here, we can remove the bulb holder, which contains all the bulbs of the rear light; we remove the damaged one and - following the example of the youtuber - when handling the bulbs we remember to use disposable gloves, to avoid touching the bulb of the new bulbs.

This way we will extend their life. We replace the burnt bulb: both to remove it and to replace it, it will be necessary to give a slight pressure and then give a quarter turn.

We put the bulb holder back in place and close the door. Operation completed.


Posted on 13 April 2025 by ScegliAuto


Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) Today we will explain how to replace the bulb of the side turn signal located on the external rearview mirror. To perform the bulb replacement, we ne…
Renault Megane (2015-2023 / Megane IV, Megane 4) This guide will show you how to remove and replace the rear light bulb of a Renault Megane. First, open the boot and start by removing the side cover…
Renault Megane (2008-2015 / Megane III, Megane 3) Today we will explain how to replace the bulb of the side turn signal located on the exterior rearview mirror of the Renault Megane 3. To perform the…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos