Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the turn signal bulb of the Renault Megane.

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Side marker bulb

Today we will explain how to replace the bulb of the side turn signal located on the external rearview mirror. To perform the bulb replacement, we need to insert a plastic tool for emulsion in the lower corner in order to remove the turn signal. Disconnect the connector from the bulb and proceed with the replacement of the turn signal. Insert the turn signal into the mirror and test the operation of the bulb by turning on the turn signals. If the lights do not work, it may be necessary to replace the fuse related to it.

Posted on 1 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the side indicator bulb of the Renault Megane 1.
How to replace the side indicator bulb of the Renault Megane 1.
Renault Megane (1995-2003 / Megane 1) If one of the side turn signals of your first-generation Renault Megane has stopped working and you are looking for a guide to help you replace the b…
How to Change the Indicator Lens on a Renault Megane
How to Change the Indicator Lens on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) How do you change the indicator lens on a Renault Megane? Remove the external rear-view mirror if damaged, or the cover to access the indicator light…
How to Replace the Indicator Light on a Renault Megane Mirror
How to Replace the Indicator Light on a Renault Megane Mirror
Renault Megane (2002-2010 / Megane 2) In this video, see how to replace the internal indicator light on a Renault Megane's wing mirror. This is a straightforward operation if done methodi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos