Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Centre Brake Light on a Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part:

A T15 w16w bulb is recommended. Open the boot, remove the two rubber caps with a flat screwdriver. To release the third brake light, simply push the metal clip visible through the hole with a screwdriver, as shown in the video. Close the rear hatch and you will notice that the back of the light is now detached, giving you space to gently pry along the entire length of the light until you can remove it. At this point, just pull the bulb to slide it out, and insert the new one. Position the new light correctly with the two metal clips, and it will be mounted simply by clipping it back into place.

Updated on 13 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Centre Tunnel of a Renault Clio
How to Remove the Centre Tunnel of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Before starting, sit in the driver's seat of your Renault Clio. Begin by removing the ashtray by simply pulling it out. Next, unscrew and remove the …
How to Replace the Third Brake Light Bulb on the Renault Clio
How to Replace the Third Brake Light Bulb on the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this short guide, you will see how to remove and replace the third brake light bulb on the Renault Clio. First, open the rear hatch of the boot an…
Replacement of the front brake pads of the Renault Clio
Replacement of the front brake pads of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The instructions in this guide will show us the process of disassembling and replacing the front brake pads of the Renault Clio. First, lift the vehi…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos