Do it yourself
Frequently asked questions about cars and motorcycles

How to Activate the Start&Stop System on the Renault Clio?

Model: Renault Clio Clio V, Clio 5 - Years 2019-2026
Part: Checks and maintenance

To activate and deactivate the Start&Stop system on the Renault Clio, there is a specific button on the central dashboard that features an A within a circular arrow. Pressing this button, if the light above it is red, means the system is deactivated; conversely, the system will be active and usable. To use the system, place the gear lever in neutral and fully release the clutch: if the car is stationary, the engine will automatically switch off. At this point, simply press the clutch pedal to restart the engine and continue driving.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The following steps will show us how to activate and deactivate the Start&Stop system of the Renault Clio, as well as the Captur. First, we get on bo…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Well-known device that is mentioned above, in fact it is now present in all recently built cars. Its function is essentially to reduce environmental …
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To disable the Start&Stop system on a Renault Clio, remove the side panel of the dashboard near the driver's door and the light activation controls. …

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 1998-2005 - Where is the heater resistor located on the Renault Clio mk2? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer
    • Clio 2005-2013 - What to do if the Renault Clio horn does not work? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos