Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable the Start&Stop System on a Renault Clio?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Checks and maintenance

To disable the Start&Stop system on a Renault Clio, remove the side panel of the dashboard near the driver's door and the light activation controls. This will allow you to unscrew the screws underneath so that the panel with the light controls can be completely removed, disconnecting the connectors at the back. Here, you will need to use a timer module to interrupt the white wire of pin 4 in the Start&Stop connector. To power the module, simply connect it to any earth wire. After the connection, refit all the panels.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Let's see how to disable the start & stop system on the Renault Clio IV without generating errors. Unscrew the six screws that secure the cover under…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The following steps will show us how to activate and deactivate the Start&Stop system of the Renault Clio, as well as the Captur. First, we get on bo…
Renault Clio (2019-2026 / Clio V, Clio 5) Temporarily deactivating the Start&Stop system of the Renault Clio model V is a simple and quick operation to be carried out independently. You just …

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 1998-2005 - Where is the heater resistor located on the Renault Clio mk2? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer
    • Clio 2005-2013 - What to do if the Renault Clio horn does not work? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos