Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Clutch on the Renault Clio 1.5 dCi

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Clutch

See other generations:
Video tutorial

Today’s main instructions will show you how to remove and replace the clutch on the Renault Clio 1.5 dCi. First, raise the vehicle and start by removing the front wheels; remove the lower plastic cover and proceed to disconnect the wishbones and front driveshafts, unscrewing all the bolts as shown in the video.

At this point, disconnect the clutch cable from the engine compartment, then unscrew the screws of the gearbox cover to remove it; this will give you access to the clutch kit, allowing you to replace and install the original components.


Posted on 21 March 2026 by ScegliAuto


Related tutorials

How to replace the starter motor on a Renault Clio 1.5 dCi
How to replace the starter motor on a Renault Clio 1.5 dCi
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) This guide will show you the procedure for removing and replacing the starter motor on a Renault Clio 1.5 dCi. First, open the bonnet and disconnect …
Replacing the Timing Belt on the Renault Clio 1.5 DCI
Replacing the Timing Belt on the Renault Clio 1.5 DCI
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Today, we will look at the instructions that will allow you to remove and replace the timing belt on the Renault Clio 1.5 DCI. First, raise the vehic…
How to Replace the Diesel Filter on a Renault Clio 1.5 DCI?
How to Replace the Diesel Filter on a Renault Clio 1.5 DCI?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) This guide outlines the procedure for removing and replacing the diesel filter on a Renault Clio 1.5 DCI. First, lift the vehicle and start by removi…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos