Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on the Renault Clio 1.5 DCI

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Timing belt

Today, we will look at the instructions that will allow you to remove and replace the timing belt on the Renault Clio 1.5 DCI. First, raise the vehicle and start by removing the front right wheel; then remove the wheel arch liner and loosen the tensioner of the alternator belt to remove it, as shown in the video. At this point, unscrew the screws of the timing cover, taking all necessary references to remove it and replace it with the new one; fit it correctly and reassemble everything, following the video tutorial to the end!

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on Renault Clio 1.5 DCi
Replacing the Timing Belt on Renault Clio 1.5 DCi
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In today's tutorial, you will see the main instructions on how to remove and replace the timing belt on a Renault Clio 1.5 DCi, as well as on other c…
How do you replace the timing belt of the Renault Clio 1.5 DCi?
How do you replace the timing belt of the Renault Clio 1.5 DCi?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In order to replace the timing belt of the Renault Clio 1.5 DCi, you need to loosen the screws that secure the front right wheel of the car, so that …
Replacement of the timing belt of the Renault Clio 1.5 dCi
Replacement of the timing belt of the Renault Clio 1.5 dCi
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Below we will discover the information that will illustrate the procedure for dismantling and replacing the timing belt of the Renault Clio 1.5 dCi. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos