Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on Renault Clio 1.5 DCi

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Timing belt

See other generations:
Video tutorial

In today's tutorial, you will see the main instructions on how to remove and replace the timing belt on a Renault Clio 1.5 DCi, as well as on other car models with the same engine. First, lift the vehicle by removing the front right wheel and the plastic wheel arch liner, unscrewing all the screws.

Then, access the timing belt from the top of the engine bay and unscrew the mounting bracket located between the timing pulleys. At this point, remove the lower pulley by taking off the auxiliary belt, and replace the timing belt, following the video to the end!


Updated on 18 April 2026 by ScegliAuto


Related tutorials

Replacement of the timing belt of the Renault Clio 1.5 dCi
Replacement of the timing belt of the Renault Clio 1.5 dCi
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Below we will discover the information that will illustrate the procedure for dismantling and replacing the timing belt of the Renault Clio 1.5 dCi. …
How to Replace the Timing Belt on a Renault Clio 1.5 DCi
How to Replace the Timing Belt on a Renault Clio 1.5 DCi
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the timing belt on a Renault Clio 1.5 DCi, loosen the bolts securing the front right wheel of the car to remove it along with the correspo…
Replacing the Timing Belt on the Renault Clio 1.5 DCI
Replacing the Timing Belt on the Renault Clio 1.5 DCI
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Today, we will look at the instructions that will allow you to remove and replace the timing belt on the Renault Clio 1.5 DCI. First, raise the vehic…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos