Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Renault Clio?

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
Video tutorial

You can replace the timing belt on a Renault Clio by loosening the bolts that secure the front wheel to its housing and those that secure the corresponding wheel arch. At this point, you will be able to locate the belt on the side of the engine and loosen the nut that secures the tensioner pulley in its place.

This will reduce the tension on the belt, allowing you to remove it from the respective pulleys. The new belt can now be installed and tensioned by reinstalling the tensioner pulley.

Finally, remount the wheel.


Posted on 8 June 2026 by ScegliAuto


Related tutorials

How to replace the timing belt on the Renault Clio 1.2
How to replace the timing belt on the Renault Clio 1.2
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The following steps will illustrate how to dismantle and replace the timing belt on the petrol Renault Clio 1.2. First, raise the vehicle and start b…
Guide to Replacing the Timing Belt on the Renault Clio 1.2
Guide to Replacing the Timing Belt on the Renault Clio 1.2
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today we will discover the instructions to remove and replace the timing belt on the petrol Renault Clio 1.2. First, open the bonnet and begin to dis…
Replacement of the timing belt of the Renault Clio 1.5 dCi
Replacement of the timing belt of the Renault Clio 1.5 dCi
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Below we will discover the information that will illustrate the procedure for dismantling and replacing the timing belt of the Renault Clio 1.5 dCi. …

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos