Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Fob Battery on a Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

In this short video tutorial, you will learn how to disassemble and replace the battery of the key fob for a fourth-generation Renault Clio. First, take your key fob and extract the key inside it: then insert it into the hole and lever it to remove the small battery cover, as shown in the video.

At this point, remove the battery and replace it with a new one of the correct type (in this case, a 2032 3V). Finally, insert it the right way round and reassemble everything, following the video to the end!


Updated on 14 April 2026 by ScegliAuto


Related tutorials

Replacing the Key Fob Battery for the Renault Clio
Replacing the Key Fob Battery for the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Here are the steps to disassemble and replace the battery of the key fob for the Renault Clio, as well as the Captur. First, take your key fob and re…
How to Replace the Remote Battery on a Renault Clio?
How to Replace the Remote Battery on a Renault Clio?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the remote battery on a Renault Clio, press the designated button at the top of the device to lift the ignition key. Use a screwdriver to …
How to Replace the Key Battery of a Renault Clio
How to Replace the Key Battery of a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Replacing the remote battery of a Renault Clio follows simple and quick steps that can be done independently. To replace the key battery, you need to…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos