Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Stalk Switch on Renault Clio IV Series

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019

In this video, you will see the steps to follow to replace the stalk switch on the Renault Clio IV series. The procedure is not very complicated but requires a bit of skill. Start by removing the screws from the steering column cover, using a plastic lever, detach and remove the finishing plastics. Using a ratchet with a Torx key, unscrew the two fixing screws of the stalk switch, disconnect the two connectors, and pull out the old component. Connect the connectors to the new stalk switch and position it in its place. Screw it in with the two fixing screws, and before proceeding to reassemble the finishing plastics, ensure everything functions correctly.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to turn the position lights on and off in the Renault Clio 3
How to turn the position lights on and off in the Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Turning the position lights on and off in the Renault Clio model 3 is very simple. First, get into the car and turn on the ignition; with the key ins…
How to Reset the Service Light on a Renault Clio IV
How to Reset the Service Light on a Renault Clio IV
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Let's see how to reset the service light on a Renault Clio IV: this is a very simple procedure. Insert the key into the ignition switch, turn on the …
How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos