Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to turn the position lights on and off in the Renault Clio 3

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

Turning the position lights on and off in the Renault Clio model 3 is very simple. First, get into the car and turn on the ignition; with the key inserted, you can turn the position lights on and off. To turn the lights on, rotate the switch on the left stalk outward.

To turn the lights off, rotate the switch on the same stalk inward. Never forget to turn off the vehicle's lights, as this would completely drain the car battery.

The lighting system is usually paired with an audio system that reminds you to switch off the lights.


Updated on 12 September 2026 by ScegliAuto


Related tutorials

How to activate the fog lights in the Renault Clio?
How to activate the fog lights in the Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this tutorial, we can see how to activate the fog lights in the Renault Clio, a very simple and quick operation. First of all, let's go inside the…
How to activate the fog lights in the Renault Clio?
How to activate the fog lights in the Renault Clio?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this tutorial we can see how to activate the fog lights in the Renault Clio, a very simple operation. These lights should only be activated in cas…
How to Replace the Front Headlight Bulbs in the Renault Clio?
How to Replace the Front Headlight Bulbs in the Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Replacing the front headlight bulbs in the Renault Clio 4 is a very simple operation; let's see how to proceed in this tutorial. First, ensure that t…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos